Rinnai R85
There are a few comments below about people having their Rinnai water heater stop working on them suddenly. The very first thing I would recommend is unplugging the unit from the wall for 2-3 minutes and then plugging the system back in. This works to reset the internal computer and may clear the error code causing the shutdown. If this doesn’t rectify the situation or if it happens again soon after, a technician is...
Takagi Condensing Tankless Review
Takagi T-H2 Condensing Here is the Takagi T-H2 Condensing Tankless hot water heater, there’s a lot to cover so lets get started. Takagi Tankless Benefits PVC venting 95% efficient 4.6 GPM in dead of winter 8.5 GPM in the summer Direct vent capability Info The T-H2 model is available as a direct vent or an Outdoor model only. Takagi’s T-H2 “2nd Generation High Efficiency Tankless” unit, is a very energy...
Rinnai R75i Specifications
Rinnai R75i Specs Natural Gas or Propane Gas Models 15,000 to 180,000 Btu 0.7 to 6.0 GPM (55 F rise) / 0.7 to 7.5 GPM (35 F rise) 98-140 Degree Settings or 98 – 185° F with (MCC-91 controller) Height 26″ Width 14″ Depth 10″ No Pilot Light – Direct Electronic Ignition Maximum Hot Water Capacity – 7.5 GPM (multiple points of use) Newly Designed Commercial-Grade Heat Exchanger New Integrated Condensate...
Rinnai R85 Tankless Water Heater
Rinnai R85 Specs Tankless Specs Specifications Hot water capacity – Minimum flow – 0.5 gpm (gallons per minute) – Maximum flow – 5.3 gpm Anticipated maximum – at 75°F temperature rise (input 45°, output 120°) 4.2 gpm There should be no single water fixture requiring more than 3.5 gpm Sized right for our Ontario climate Input BTU rating: Minimum 15,000 Maximum 180,000 Efficiency rating: 82% Installation requirements •...
Rinnai Specifications Sheet
This sheet contains the technical specifications for the Rinnai tankless water heating system. Click here to download
Recent Comments