Features of the NPE-210A2

    The NPE-210A2 is a high efficiency Condensing Tankless Water Heater. The A2 at the the end of this model number represents that it is the (A) advanced version and the (2) is the second generation, which is the newest and best version.

    Navien NPE-210A2 tankless water heater
    Internals of a Navien NPE-210A2

    The A or Advanced model has a few more built in features over the S (standard) version tankless water heater. Purchasing the Advanced Navien tankless gets you a built in buffer tank as well as a built in re-circulation pump. If you are looking to run a hot water re-circulation loop or possibly add some sort of heating (towel warmer, hydronic floors, forced air) with your tankless than the NPE-A2 is the model you will want to go for.

    NPE Tankless Sizes

    The tankless unit we are discussing is the NPE-210A2 from Navien. The 210 in the model name represent how much heat the unit can produce to heat water up. For the NPE-210A2 you can expect a MAXIMUM output of 180,000 BTU/H. The amount of heat generated is directly related to amount of hot water a tankless can produce.

    The temperature of the incoming water that the tankless needs to heat can significantly affect its hot water flow rate. For example. A Canadian home in winter can see their homes incoming water temperature dip to 5 degrees Celsius, which is pretty cold. A tankless needs to heat that 5 degree water up quite a lot to make the shower comfortable and the more power (BTU/H) your tankless can produce the more hot water you get in your home. This model is probably our most installed version. It is a great combination of both efficiency and power for most homes in Canada or Northern states.

    Navien NPE-A2 Models


    • Max: 150,000 BTU/H
    • Indoor wall-hung
    • 67°F temp rise – 4.3GPM
    Read more about the NPE-180A2


    • Max: 180,000 BTU/H
    • Indoor wall-hung
    • 67°F temp rise – 5.1GPM
    Read more about the NPE-210A2


    • Max: 199,000 BTU/H
    • Indoor wall-hung
    • 67°F temp rise – 5.6GPM
    Read more about the NPE-240A2

    NPE-210A2 Specifications

    • Natural gas – 12,000 – 180,000 BTU/H
    • Propane – 12,000 – 180,000 BTU/H
    • 95% efficiency
    • 67°F temp rise – 5.1 GPM (19.3 l/m)
    • ½ gas pipe capable up to 24′
    • Field convertible gas system
    • Ultra condensing efficiency
    • Dual stainless steel heat exchangers
    • Low NOx emissions (20ppm)
    • SCH 40, 2″ venting up to 75′

    Interested In Buying a NPE-210A2 Navien Tankless

    We sell, install, and service Navien tankless water heaters and truly believe in the tankless system. If you have any question or concerns give us a call or message us as we will love to chat ANYTHING tankless.

    Give us a Call Today


    Or alternatively fill out our for below and we will get back to you as soon as we can.