Tankless Hot Water Heaters, Efficient, Effective, Endless.
Tankless For Sale
Takagi Condensing Tankless Review
Mar 16th
Takagi Condensing Tankless
|
Here is the Takagi T-H2 Condensing Tankless hot water heater, there’s a lot to cover so lets get started.
Takagi Tankless Benefits
- PVC venting
- 95% efficient
- 4.6 GPM in dead of winter
- 8.5 GPM in the summer
- Direct vent capability
Info
The T-H2 model is available as a direct vent or an Outdoor model only. Takagi’s T-H2 “2nd Generation High Efficiency Tankless” unit, is a very energy efficient tankless unit (up to 95% in thermal efficiency) in the Tankless industry. The T-H2 was apparently designed for residential and light commercial use and offers Takagi’s Easy-Link to join multiple units.
The T-H2 can provide upwards of three showers’ worth of water simultaneously in colder climates.
The T-H2 can be vented with PVC, providing 0 clearance for DV installations. PVC venting can be used in all applications and apparently Takagi says that 3″ exhaust venting is now available (previously it required a 3″ intake and a 4″ exhaust).
The primary heat exchanger is made of “Heat Resistant Alloy” HRS35 Copper, Takagi has also added a “High Corrosion Resistant Stainless Steel” #316L secondary heat exchanger to recover waste heat from the vent stack before it leaves the unit to preheat the incoming ground water. This second heat exchanger and the resulting condensation that forms from the high efficiency operation, classify it as a “Condensing” Water Heater.
Download the official Takagi T-H2 Manual Here. Must have a PDF viewer.
Specifications
| Natural Gas Input | Min. 13,000BTU | Max. 199,000BTU |
| LPG Input | Min. 13,000BTU | Max. 199,000BTU |
| Gas Connection | 3/4″ NPT | |
| Water Connection | 3/4″ NPT | |
| Condensate Water Drain | 1/2″ NPT | |
| Natural Gas Pressure Inlet | Min. 5.0″WC | Max 10.5″WC |
| LP Gas Pressure Inlet | Min. 8.0″WC | Max. 14.0″WC |
| Weight | DV = 73lbs. | |
| Dimensions | 25.6″ x 18.5″ x 12.4″ | |
| Ignition | Electronic Ignition | |
| Electrical Supply | AC 120V (60 Hz) | |
| Water Pressure | Min. 15psi | Max. 150psi |
| T-H2DV Manifold Pressure | Natural: 3.15″WC | Propane:4.6″WC |
As we all know Canada can has winter, and this affects our ground water temperature. The higher the tankless has to heat ground water up the lower the output flow of hot water is. Ontario’s ground water fluctuates with the coldest temperatures occurring in February and the warmest is September. Toronto, Hamilton, Brampton, Scarborough, Mississauga for example are places that rarely see ground water temperatures dip below 40 degrees Fahrenheit. Thus its safe to assume a minimum of 4.6GPM in the worst of conditions.
Download the official Takagi T-H2 specifications sheet here. Must have PDF viewer.
Conclusion
If you are looking for a condensing tankless that is relatively cheap and flexible for installation the Takagi condensing unit is definitely one that you should consider. This unit is $2575 our price and the Suggested Retail is $3920, which is considerably more.
Fill out the form below if you are at all interested in this or any other Tankless Water Heater.
Takagi T-H1 – $2575 Tankless
Mar 10th
T-H1 – $2575.00
|
The Takagi T-H1 is a condensing tankless water heater, meaning that it is 95% efficient and qualifies for the full 750$ in government rebates (if you have completed the home energy audit).
Significant benefits of this unit are:
T-K3-SP – $1195.00
Mar 10th
T-K3-SP – $1195.00
|
The T-K3-SP is perfect for smaller homes or cottages. This unit can easily run 1-2 bathroom houses. With the cold ground temperatures in southern Ontario you can expect about 2.5 to 3.5 GPM and upwards of 7GPM in the summer. This Takagi is an exceptional price for such a low cost. Homeowners should expect between 82 and 85 percent efficiency for this unit on natural gas. Should you choose to go ahead with an energy audit you will receive a governmental rebate of 630$.
Pictures and Further Specifications to come.
T-KJr – Takagi Tankless Water Heater
Mar 10th
T-KJr – $995.00
|
Here is the T-KJr from Takagi, it is a small unit and is great for any small applications (cottages, condos, etc). Priced at only $995 Canadian.
Full specs will be coming soon.
Takagi T-K3 – $1495.00
Jan 21st
T-K3 – $1495.00
|
The T-K3 model, also known as the “Revolutionary T-K3,” is one of Takagi’s most versatile and powerful residential units. The T-K3 offers Easy-Link capability, which allows you to connect up to four units without the use of a controller unit. The T-K3 can also be converted to a direct vent model.
Compact Size:
Only 13.8 inches wide, the T-K3 can be recessed between wall studs for even more space savings! A special recess box is available for outdoor installations.
Lower Activating Flow Rate:
The T-K3 activates at only 0.5 GPM, which allows the use of smaller water flows in bathroom sinks and showers. This reduces water waste and allows for stable temperatures.
Parallel Installation:
Using Takagi’s Easy Link technology, the T-K3 can be installed in parallel with up to three other units without the use of an additional control box, generating more flow while saving money, space and installation time. Four T-K3 unites will deliver a total of 21.6 GPM at 60 degrees F delta T; or 26 GPM at a 50 degree F delta T.
Direct-Vent Conversion:
The T-K3 can be easily converted into a direct vent model for inside installations that need to import combustion air from outside.
Eight Temperature Settings:
Instead of the usual four settings, the T-K3 offers eight separate temperatures, set by dip-switch: 104 degree F, 113 degree F, 122 degree F, 131 degree F, 140 degree F, 158 degree F, 176 degree F, and 185 degree F. This versatility reduces the need for a separate remote control. However, setting temperatures other than the eight presets requires the TM-RE10 temperature controller.
Longer vent runs:
The T-K3 can have a vent pipe run up to 50 feet with five elbows, instead of the normal 35 with three elbows.
As you can see, the T-K3 incorporates all those “why-don’t-you-have-this?” features into this one new product. Its larger flow capacity through parallel connections will meet the hot-water needs of most high-volume residential applications and many commercial projects, too. In short, the T-K3 fills the gap between the single residential heater and multiple commercial T-M1 units. Performance depends on the temperature of the ground water of course: At a delta T of 60 degrees F in warmer areas – for example, where the winter ground water is 60 degrees F and with the output set at 122 degrees F – the T-K3 will provide a 5.4 GPM, or 324 GPH. In colder areas where the input temperature may be 40 degrees F or less, expect a flow rate about 4.1 GPM, or 246 GPH.
Price:
The Takagi T-K3 is currently selling for $1495.00 if interested fill out the form HERE
TK3 Specifications:
| Natural Gas Input | Min. 11,000 Btu | Max. 199,000 Btu |
| LPG Input | Min. 11,000 Btu | Max. 199,000 Btu |
| Gas Connection | 3/4″ | |
| Water Connection | 3/4″ | |
| Natural Gas Pressure Inlet | Min 5.0″ W.C. | Max 10.5″ W.C. |
| LP Gas Pressure Inlet | 8″ Min. W.C. | 13.5″ Max. W.C. |
| Weight | 40 lbs | Electronic Ignition |
| Dimensions | 20.5″ X 13.8″ X 8.5″ | |
| Ignition | Electronic Ignition | |
| Electrical Supply | AC 120 V | |
| Water Pressure | Min. 15 psi | Max. 150 psi |
| Manifold Pressure | Natural 2.5 | Propane 4.4 |
View or Download the Specifications Sheet – Click to View